Injection Station

Molten resin is injected through an optimised hot runner manifold onto core rods, forming parisons with consistent wall thickness and accurate thread geometry. The 160 mm injection stroke and 3+N barrel zone configuration ensure thorough plasticisation and precise metering for each of the ZQ60 cavities.

Blow Station

The rotary table indexes the core rods carrying hot parisons into the blow mold cavity. Compressed air at 0.7–1.2 MPa is injected through the core rod, expanding the parison to its final bottle shape within the cooled blow mold. The 100 kN blow clamping force secures the mold securely throughout expansion.

Stripping Station

Finished bottles are stripped from the core rods at the ejection station. The 230 mm stripping stroke accommodates taller bottle profiles up to 220 mm in height, ensuring clean, distortion-free release. Bottles exit to a conveyor directly, ready for downstream inspection or packaging integration.

Higher Clamping Force Than Competing 65T-Class Machines

The ZQ60 delivers 600 kN injection clamping force — exceeding the Jomar IBM65 (460 kN, +30.4%), SUMA 65iB (580 kN, +3.4%), and Bloma IBM50 (500 kN, +20%). Greater clamping force reduces flash risk on high-cavitation tooling and extends mold service life across long production runs.

Superior Injection Weight Capacity

With dual screw options (45 mm and 50 mm), the ZQ60 delivers shot weights of 260 g and 383 g — significantly exceeding the Jomar IBM65 (205 g) and SUMA 65iB (169–264 g). The larger shot capacity enables higher-cavitation tooling, larger bottle sizes, or heavier-wall packaging on the same machine platform.

Up to 14 Cavities for Small Bottles

The ZQ60 supports up to 14 cavities for 10 ml bottles and 10 cavities for both 30 ml and 60 ml — providing excellent output rates for high-volume pharmaceutical and nutraceutical production. This cavitation capacity is comparable to or exceeds that achievable on Jomar IBM65 and SUMA 65iB tooling at the same bottle volume.

Energy-Saving Dual Hydraulic Design

Operating power rate is only 52–70% of total installed power, achieved through the pressurised booster clamping structure that isolates clamping force generation from the open/close cycle. At 37 kW total power, the ZQ60 is energy-efficient relative to its output capacity — reducing per-bottle electricity cost versus comparable Western-brand machines in the same class.

Wider Platen for Flexible Mold Layouts

The 600 x 390 mm platen provides a symmetric, wide mold mounting area — broader in the short axis than the Jomar IBM65 (432 mm) and comparable to SUMA 65iB (620 x 400 mm). This supports symmetric multi-cavity layouts and accommodates a wider range of existing mold footprints when transitioning from other IBM platforms.

Precision Mold Tooling Included

Injection mold cavities are machined from imported S136 steel or 4Cr13 stainless steel, providing HRC 48–52 hardness and mirror-polishable surface finish suitable for high-clarity PS and PCTG pharmaceutical bottles. Optimised hot runner manifold and mandrel design deliver bottle weight deviation within ±1% across all cavities.

Compact Low-Profile Footprint

At 3.8 x 1.4 x 1.8 m and 5 tonnes net weight, the ZQ60 has a notably lower height profile than the Jomar IBM65 (2.92 x 1.98 x 3.41 m) — making it particularly suited to factories with ceiling height limitations. The compact footprint also simplifies multi-line installation in constrained production floor layouts.

Extended Bottle Range: Up to 2,000 ml

The ZQ60 supports bottle volumes from 1 ml to 2,000 ml — a broader range than the ZQ40 (1–1,500 ml). This makes the ZQ60 the preferred choice for production lines requiring flexibility across both small pharmaceutical vials and large consumer packaging up to 2L, without requiring a machine change.

💊 Pharmaceutical Packaging

Oral liquid bottles (30–500 ml), tablet containers, syrup bottles, nasal spray and eye dropper bodies. The ZQ60 is a preferred choice for mid-volume pharmaceutical lines requiring 5–10 cavity tooling on 100–250 ml HDPE or PP bottles. The pharma-compatible lubrication layout and zero-flash neck formation meet GMP production requirements.

💐 Cosmetics & Personal Care

Shampoo, body lotion, serum, toner, and foundation bottles (50–500 ml). The ZQ60 processes high-transparency PS and PCTG for crystal-clear cosmetic packaging. Up to 10 cavities on 60 ml bottles enables high daily output for personal care bottle lines serving retail and OEM customers.

🍼 Food & Beverage

Lactic acid bacteria drink bottles (PS), seasoning containers, vinegar and soy sauce bottles, food supplement liquids. The ZQ60 handles food-grade PP and PS across a wide volume range (30 ml to 2,000 ml), accommodating single-serve to family-size container production on one machine.

🥐 Feeding Bottles & Baby Products

PP and PCTG feeding bottle bodies (120–300 ml), wide-mouth jars for baby food purees. The ZQ60 platen (600 x 390 mm) accommodates wider-body mold designs needed for feeding bottle production. PP processing on the ZQ60 meets food-contact and BPA-free regulatory requirements for baby product markets.

💧 Daily Chemical Packaging

Detergent concentrate bottles, fabric softener containers, dishwashing liquid packaging (250 ml to 1L). HDPE and PP processing on the ZQ60 provides chemical resistance for household cleaning product containers. The higher injection weight capacity (up to 383 g) versus the 40T class enables production of heavier-wall containers for chemical packaging lines.

📈 Health Supplements & Nutraceuticals

Vitamin tablet bottles, protein supplement containers, herbal liquid packaging (100–500 ml HDPE/PP). The ZQ60 supports GMP-compatible production layouts for nutraceutical manufacturers in the US, Korea, South Africa, and other markets where FDA or local regulatory compliance for container production is required.

Packaging manufacturers

Expanding IBM capacity or replacing aging Jomar, SUMA, or Uniloy lines

Overseas agents & distributors

Representing our ZQ series with exclusive territory arrangements

Pharma & FMCG brands

Building in-house packaging capability with turnkey IBM solutions

Trading companies

Supplying IBM machinery across Asia, Africa, and Latin America